Laying out the best artificial turf in San Jose on your own may be daunting at first, but it can also be one the most fulfilling experiences. Synthetic grass landscape can help you save a ton on property maintenance and water bills. More importantly, doing it yourself will cut down labor costs. Just follow our guide, and you’ll be creating artificial grass landscapes and putting greens like a pro!
DIY Steps for Installing Artificial Grass
Ready to embark on your most ambitious home project yet? Start laying out your grass like a pro! Here is the step-by-step process to install your artificial turf:
- Remove the existing grass on the lawn.
If you have a lawn that is in poor condition, remove the clumps of grass and level the area. Remove up to 4 inches of your lawn. If you have a sprinkler system, pull out the sprinkler heads to keep the ground even.
- Lay out the base.
Spread the base material evenly for your turf. In addition, consider placing a weed barrier to prevent the growth of vegetation. Afterward, smooth out the base by using a compactor.
- Install the turf.
Start unrolling the grass and lay it under the sun for it to expand to its maximum size. After an hour, place the turf gently on top of the base. In placing the rolls of turf side by side, make sure that the blade direction and stitch patterns are the same. Wear knee pads for protection while fitting in the turf rolls.
- Cut loose edges in the turf.
In cutting the turf, you can use either carpet cutters or razor knives. Perform the cuts at the back of the grass to see the stitch rows. Make sure there is an allowance of ½ inches along the turf border for your finishing touches. Once you have achieved the cut you want, secure the turf. Make sure you use the best artificial grass accessories for securing turf, such as tape and glue provided by the manufacturer. In gluing turf, allow 15 minutes for the glue to settle in.
- Secure the turf borders
Secure the synthetic turf by tucking in the edges with a metal putty knife and hammer. Drive staples or turf nails into the turf using a hammer to hold it into the ground. Nails and staples should be driven in distances of 6 inches each.
- Spread the infill
Before placing the infill, brush up the turf using the power broom to spread the blades upward. Afterward, you can disperse the infill into your grass. Artificial turf infill comes in many varieties of either sand or rubber. To ensure that you are placing in the required infill for your lawn, consult your supplier, or refer to the turf manual. Use a drop spreader for precise placement of the infill.
- Brush in the infill
Upon placement of the infill, brush up the turf blades to view the grass in all its realistic glory. To make the turf appear newly mowed, use a power broom to brush the blades up. Do this until the infill is properly set it, and the seams are evened out.
Get the Artificial Grass Landscape of Your Dreams!
Nothing beats the fulfillment of achieving a well-appointed synthetic grass landscape on your own. Not only do you save on labor costs; you can also boast of a landscape with a quality akin to the best putting greens in your area. By following our step-by-step method, you’ll have a vibrant evergreen outdoor space in no time!